How to choose the right tradie gear at Brookvale: A step-by-step guide

When it comes to staying safe, comfortable, and compliant on the job, not all gear is created equal. If you’re a Brookvale tradie, you already know the demands of local worksites — from construction and electrical to plumbing, mechanics, and warehousing. Choosing the right tradie gear from Brookvale Workwear isn’t just about ticking the safety box. It’s about finding equipment that works as hard as you do.

If you’re looking for high-quality workwear, safety gear, or safety boots at Brookvale, this guide will walk you through the process step by step.

Step 1: Start with your PPE essentials

Every job site in NSW has specific PPE requirements. Before you get into the details, make sure you’ve covered the basics:

• Hi-vis protective clothing (Class D for daytime or Class D/N for day and night use)
• Steel cap safety boots to protect against impact and punctures
• Gloves suited to your trade — cut-resistant, chemical-resistant, or thermal
• Eye and hearing protection for noisy or dusty environments
• Hard hats and harnesses where required

Browse our full PPE & Safety Gear range.

Step 2: Choose workwear designed for your climate

Tradies face hot summers, wet winters, and everything in between. Your gear should be tough enough to handle the conditions.

• Lightweight shirts and pants keep you cool in summer while still meeting compliance.
• Waterproof jackets are a must for outdoor jobs in winter.
• Breathable fabrics reduce sweat and fatigue.

Don’t overlook fabric technology. Cotton blends are durable but may trap heat; modern polyester or ripstop materials wick away sweat and dry fast after a sudden downpour. Layering is also key — a hi-vis tee under a lightweight jacket gives you flexibility when the temperature swings during the day. 

Local insight matters — that’s why a local workwear supplier like Brookvale Workwear & Safety ensures stock is matched to the climate and job site needs.

Explore our Workwear.

Step 3: Invest in the safety boots tradies trust

Your boots are the foundation of your day. The wrong pair can leave you sore, fatigued, or even injured. Look for:

• Steel toe or composite toe protection
• Slip-resistant soles for wet or oily surfaces
• Cushioned insoles for long shifts on your feet
• Electrical hazard protection if you’re in the trades that need it

Consider the environment too. Are you mostly on concrete floors, scaffold planks, or muddy worksites? Each surface has different traction needs. A roofer’s boot won’t cut it for a mechanic, and a lightweight warehouse shoe isn’t enough for heavy construction. Choosing wisely makes your boots an investment, not an expense.

Check out our full Safety Boots range.

Step 4: Match your gear to your trade

Different jobs demand different gear. For example:

• Construction tradies: full PPE set, hi-vis, and durable pants
• Electricians: non-metallic composite toe boots and insulated gloves
• Plumbers & mechanics: chemical-resistant gloves and kneepad-friendly pants
• Warehouse staff: lightweight hi-vis and slip-resistant boots

This is where industrial workwear and safety gear pays off — purpose-built to keep you safe while making the job easier.

Step 5: Buy local, buy with confidence

When you shop with a local supplier, you get more than just gear. You get peace of mind. Brookvale Workwear & Safety offers:

• Stock from trusted Australian brands
• In-store fitting to make sure your gear is comfortable and compliant
• Advice from locals who know tradies and the jobs they do

It’s about building trust as much as building your kit.

Step 6: Check standards and compliance

Don’t risk fines, injuries, or downtime with non-compliant gear. Always make sure your protective clothing in Brookvale meets Australian Standards, including:

• AS/NZS 2210.3 for safety boots
• AS/NZS 4602.1 for hi-vis clothing
• AS/NZS 1270/1337 for hearing and eye protection

For full guidelines, see SafeWork NSW.

Step 7: Aftercare and maintenance

Buying the right gear is only half the battle — keeping it in top condition extends its life and keeps you compliant.

• Wash hi-vis shirts separately to prevent fading and maintain reflective tape.
• Dry boots properly if they get wet to stop mould and leather breakdown.
• Replace damaged gloves or scratched glasses immediately — they can’t protect you if they’re compromised.

A little aftercare saves you money in the long run and ensures your safety gear in Brookvale stays up to scratch.

Step 8: Upgrade as your needs change

Tradie gear isn’t a one-and-done purchase. Boots wear down, hi-vis fades, and PPE needs replacing after exposure or damage. Regularly check your kit for:

• Worn soles or broken stitching in boots
• Torn hi-vis or faded reflective tape
• Scratched lenses in safety glasses

Upgrading your gear regularly keeps you compliant and comfortable.

Ready to gear up?

The right tradie gear in Brookvale isn’t just about meeting standards — it’s about protecting yourself, working comfortably, and investing in tools that support your livelihood. At Brookvale Workwear & Safety, we’ve got the essentials covered, from safety boots that tradies can trust to compliant PPE and protective clothing. Visit us in-store or explore our full range online today.

And if you’re looking for even more choice, check out our partners at Workboot Warehouse for additional styles and brands to keep you safe on the job.

FAQ

What safety gear is required for tradies in NSW?

Most trades require PPE including hi-vis, steel cap boots, and eye/hearing protection that meets AS/NZS standards.

How do I choose the right PPE for my job?

Start by identifying your job site risks, then choose gear built for those conditions. Fit and comfort also matter for long-term wear.

What’s the difference between class d and class d/n hi-vis?

Class D is for daytime only. Class D/N adds reflective tape for night use or low-light visibility — perfect for early starts or long shifts.